Kubota R540 User Manual

LIST OF ERROR CODE NUMBERS
Error
code
number
Problem or failure
Machine condition
Provisional measure and
correction
Engine performance
Machine performance
Acceleration
limited
Engine out-
put limited
Engine stop-
ped
E:001
Meter CAN commu-
nication
- - -
The Controller Area Network
(CAN) has developed a fault.
Measured values may be in-
correct and switches may not
function.
Immediately contact your local
dealer
.
E:014
Hydraulic-oil temper-
ature has reached a
specified level.
- - - ---
1. Stop the engine and
check the level in the hy-
draulic-oil tank and for a
hydraulic oil leak.
2. Fill to proper level.
3. If “E:014” still appears,
immediately contact your
local dealer.
E:016 Fuel sensor system - - -
The fuel-level-indicator does
not appear on the meter
. Other
functions of the machine are
still operative.
Immediately contact your local
dealer.
E:018
Hydraulic oil temper-
ature sensor
- - -
The HST oil-temperature
warning indicator does not
light up on the meter panel.
Other functions of the machine
are still operative.
Immediately contact your local
dealer.
E:019
Accelerator pedal
sensor
◎ - - The machine fails to move.
Immediately contact your local
dealer.
E:022 Hydraulic lock - - - Lock is not active.
Immediately contact your local
dealer.
E:023 Speed control switch - - -
It is impossible to change the
speed setting by the speed-
control-switch.
Immediately contact your local
dealer.
E:024 Differential lock - - - Differential lock does not work.
Immediately contact your local
dealer.
E:025 Parking brake - - -
Parking brake is not active.
The machine would be in neu-
tral.
Immediately contact your local
dealer.
E:026
Solenoid for traveling
forward
- - -
Solenoid for traveling forward
is not active and the machine
would be in neutral.
Immediately contact your local
dealer.
E:027
Solenoid for traveling
backward
- - -
Solenoid for traveling back-
ward is not active and the ma-
chine would be in neutral.
Immediately contact your local
dealer.
E:028 Direction switch - - -
The machine is locked in neu-
tral.
Immediately contact your local
dealer
.
E:029 AUX port knob - - - AUX port does not work.
Immediately contact your local
dealer
.
E:031
Solenoid valve for
AUX forward SW
- - - AUX port is not active.
Immediately contact your local
dealer.
E:032
Solenoid valve for
AUX backward SW
- - - AUX port is not active.
Immediately contact your local
dealer.
E:033
Electrical power sup-
ply
- - - AUX port is not active.
Immediately contact your local
dealer.
(Continued)
TROUBLESHOOTING LIST OF ERROR CODE NUMBERS
132
R540

Kubota R540 Specifications

General

Operating Weight	9171 lbs (4160 kg)
Bucket Capacity	0.8 cu. yd (0.6 m3)
Horsepower	51.0 hp (38.0 kW)
Lift Capacity	1, 950 kg
Lift Capacity at Full Height	1, 950 kg