RECOMMENDED OILS
RECOMMENDED OIL LIST
IMPORTANT :
•
The hydraulic oil used from the factory is the following product.
• The brake fluid used from the factory is the following product.
• Use the following engine oil.
• Use the following oil in front and rear axle cases for all seasons.
Hydraulic oil used from the factory ROWE Hightec Fomula GT
Brake fluid used from the factory ROWE Hightec HLP22 VG 22
Engine oil API service classification CJ-4 or CK-4
Oil in front and rear axle cases TOTAL TRANSMISSION T.H.F.I.
Recommended oils
Application Viscosity Shell ExxonMobil
Gear oil All-weather gear oil
80W
API GL-4
Hydraulic oil
In winter or by low temperatures
SAE 5W
SAE 10W
In summer or by high ambient tempera-
tures
SAE 30
SAE 40
SAE 50
All-weather hydraulic oil SAE 10W-40
Brake fluid ISO VG 22
Grease Shell Alvania EP2 Mobilux EP2
Fuel Diesel Fuel No.2-D S15
Fuel under -5 ℃ Diesel Fuel No.1-D S15
NOTE :
•
Engine oil
– Use the engine oil of suitable American-petroleum-institute (API) service classification and proper
SAE engine-oil standards according to the ambient temperatures.
Above 25 ℃ SAE 30 or SAE 10W-30, SAE 15W-40
0 ℃ to 25 ℃ SAE 20 or SAE 10W-30, SAE 15W-40
Below 0 ℃ SAE 10W or SAE 10W-30, SAE 15W-40
– See the following table for the suitable API classification engine oil and the fuel.
Fuel
Engine oil classification (API classification)
Oil class of engines except external DPF
Ultra low sulfur fuel [＜ 0.0015% (15 ppm)] CJ-4 or CK-4
• Fuel
–
Use the ultra-low-sulfur-diesel-fuel of the following concentrations only for the engine.
Ultra low sulfur diesel fuel Below 0.0015% (15 ppm)
RECOMMENDED OIL LIST RECOMMENDED OILS
To Next Page
Loading...
Need help?
General
