(1) Starter switch (A) STOP
(B) RUN
(C) START
3. Horn switch
When pressing the horn switch, the horn will beep.
The
horn switch is operative even when the starter key
is in the [STOP] position.
(1) Horn switch
4. Multi function switch
4.1 Turn signal blinking
Operate the multi-function switch to the right or left
according
to the direction in which the machine is to be
turned. The corresponding turn signal will blink.
Be sure to return the multi-function switch to the center
position after the turn.
(1) Multi function switch (A) To blink right turn signal
(B) To blink left turn signal
4.2 High-low beam changing
Pull up the multi-function switch toward the steering
wheel, and the high beams light up.
Y
ou can switch the high and low beams each other by
moving up and down the multi-function switch.
(1) Multi function switch
5. Headlight switch
WARNING
T
o avoid personal injury or death:
• For night operation, keep all machine-mounted
lights operating. Check for burned out lights
and replace immediately.
Headlight switch owns 3 positions.
When positioned on your side, the lights stay off.
Move the headlight switch to the first position to turn on
the clearance light, and to the second position to turn
on the headlights.
CHECKS FOR THE SWITCHES
CHECKS BEFORE STARTING THE MACHINE
To Next Page
Loading...
