KYMCO Bet & Win 250 User Manual

3. INSPECTION/ADJUSTMENT
3-4
Bet & Win 2 50
ENGINE OIL
OIL LEVEL INSPECTION
Stop the engine and support the motorcycle
upright on level ground.
Wait for 2_ 3 minutes and check the oil
level with the dipstick. Do not screw in the
dipstick when making this check.
OIL CHANGE
Remove the oil drain bolt to drain the engine
oil.
Install the aluminum washer and tighten the
oil drain bolt.
Torque: 14.7N-m
Pour the recommended oil through the oil
filler hole.
Oil Capacity:
At disassembly: 1.1 liter
At change: 0.9 liter
Recommended Oil:
SAE: 15W40#
API: SG/CD
Start the engine and check for oil leaks.
Stop the engine and recheck the oil level.
OIL FILTER SCREEN INSPECTION
Drain the engine oil.
Remove the oil filter screen and spring.
Clean the oil filter screen.
Install the oil filter screen, spring, and filter
screen cap.
Fill the engine with recommended engine oil.
Spring
• Drain the oil while the engine is warm.
＊
• Replace the aluminum washer with a
new one if it is deformed or damaged.
＊
Oil Dipstick
Oil Filter Screen Cap
Oil Filter Screen
www.PlanDeGraissage.org

KYMCO Bet & Win 250 Specifications

General

Displacement	249.4 cc
Cooling System	Liquid-cooled
Fuel System	Carburetor
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Fuel Capacity	12 liters
Ignition	CDI
Width	770 mm
Height	1, 370 mm
Seat Height	780 mm
Engine Type	4-stroke, single-cylinder