KYMCO Bet & Win 250 User Manual

3. INSPECTION/ADJUSTMENT
3-5
Bet & Win 2 50
AIR CLEANER
Remove the eight air cleaner case cover
screws and the cover.
Remove the air cleaner element.
Check the element and replace it if it is
excessively dirty or damaged.
CHANGE INTERVAL
More frequent replacement is required when
riding in unusually dusty or rainy areas.
SPARK PLUG
Remove the frame center cover.
Remove the spark plug cap and spark plug.
Check the spark plug for wear and fouling
deposits.
Clean any fouling deposits with a spark plug
cleaner or a wire brush.
Specified Spark Plug: NGK: DPR7EA9
Measure the spark plug gap.
Spark Plug Gap: 0.9mm
Torque:14.7_ 19.6N-m
｝
Gap
Wear
Fouling
Deposits
Spark Plug
Cracks
Damage
• The air cleaner element has a
viscous type paper element. Do not
clean it with compressed air.
• Be sure to install the air cleaner
element and cover securely.
＊
• When installing, first screw in the spark
plug by hand and then tighten it with a
spark plug wrench.
＊
Screws
Air Cleaner Case Cover
Air Cleaner Element
Deformation
0.9mm
www.PlanDeGraissage.org

KYMCO Bet & Win 250 Specifications

General

Displacement	249.4 cc
Cooling System	Liquid-cooled
Fuel System	Carburetor
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Fuel Capacity	12 liters
Ignition	CDI
Width	770 mm
Height	1, 370 mm
Seat Height	780 mm
Engine Type	4-stroke, single-cylinder