Kyocera Rise - Disconnect or Unpair from a Bluetooth Device; Send and Receive Information Using Bluetooth

Tools and Calendar 157
3. Make sure that the headset is discoverable.
4. Touch the headset’s name on the
AVAILABLE DEVICES
list.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in
Disconnect or Unpair From a Bluetooth Device, and then follow the instructions in
Connect a Bluetooth Headset or Car Kit.
Disconnect or Unpair From a Bluetooth Device
You can manually disconnect or unpair from a Bluetooth device through the Bluetooth settings
menu.
Disconnect a Bluetooth Device
1. Press
Home
>
Menu
and touch
System settings
>
Bluetooth
.
2. On the
PAIRED DEVICES
list, touch >
Disconnect
.
Unpair From a Bluetooth Device
You can make your phone forget its pairing connection with another Bluetooth device. To
connect to the other device again, you may need to enter or confirm a passcode again.
1. Press
Home
>
Menu
and touch
System settings
>
Bluetooth
.
2. On the
PAIRED DEVICES
list, touch >
Unpair
or
Disconnect & unpair
(when
connected).
Send and Receive Information Using Bluetooth
You can use Bluetooth to transfer information between your phone and another Bluetooth-
enabled device such as a phone or notebook computer. The first time you transfer information
between your phone and another device, you need to enter or confirm a security passcode.
After that, your phone and the other device are paired, and you will not need to exchange
passcodes to transfer information in the future.
Send Information From Your Phone to Another Device
You can send the following types of information, depending on the device you are sending to:
● Images and videos
● Contacts information