Kyocera TASKalfa 181 User Manual

Printing Functions
5-16 OPERATION GUIDE
Emulation
NOTE: You can set the emulation for each interface.
Emulation Mode Selection
Emulation modes that can be used with this machine: PCL6, KC-GL, KPDL, KPDL (AUTO), Line Printer,
IBM Proprinter, Diablo 630, EPSON LQ-850
If you set KC-GL, you can set the thickness of the pen and the page size.
If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be automatically
performed according to the print data.
If you set KPDL or KPDL (AUTO), the details of any error that occurs during printing can be printed.
1 Press the Print key.
2 Press U or V to select MENU, and then press the
Enter key.
3 Press U or V to select Emulation, and then
press the Enter key.
4 Press U or V to select the desired interface, and
then press the Enter key.
5 Press U or V to select the desired emulation, and
then press the Enter key.
If you have selected KC-GL, set KC-GL Pen
Thickness.
If you have selected KPDL or KPDL (AUTO), set
KPDL Error Printing.
If you have selected KPDL (AUTO), perform KPDL
(AUTO) Alternative Emulation Selection.
GO
CANCEL
Ready
MENU
Print Status Page
Menu
Interface
Emulation
Back
USB
Interface
Network
Back
PCL 6
Emulation
KC-GL

Kyocera TASKalfa 181 Specifications

General

Print Technology	Laser
Type	Monochrome
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Manual
Memory	64 MB
Functions	Print, Copy, Scan
Print Speed	18 ppm
Copy Speed	18 cpm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Supported Operating Systems	Linux