Kyocera TASKalfa 181 User Manual

Preparation before Use
2-6 OPERATION GUIDE
Connecting USB Cable
Follow the steps below to connect a USB cable to the machine.
1 When the machine is powered up, first press the
Power key on the operation panel. Check that the
Power indicator and the memory indicator are off.
After this, turn off the main power switch.
2 Connect the USB cable to the appropriate interface
located on the right side of the body.
3 Connect the other end of the cable to the PC.
Connecting the Power Cable
Connect one end of the supplied power cable to the machine and the other end to a power outlet.
IMPORTANT: Only use the power cable that comes with the machine.

Kyocera TASKalfa 181 Specifications

General

Print Technology	Laser
Type	Monochrome
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Manual
Memory	64 MB
Functions	Print, Copy, Scan
Print Speed	18 ppm
Copy Speed	18 cpm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Supported Operating Systems	Linux