Kyocera TASKalfa 181 User Manual

System Menu
6-2 OPERATION GUIDE
Default Setting Mode
For this machine, the state that the machine enters at the end of warm-up or when the Reset key is pressed is
called initial mode. The settings of this machine that are made automatically in the initial mode are called default
settings. The default settings are divided into the Copier Default Settings and the Machine Default Settings.
These settings can be changed freely according to the method of use.
Copier Default Settings
You can set the following items as copier default settings.
• Density Mode
• Original Image Quality
• EcoPrint Mode
• Background Color Adjustment
• Paper Selection
• Paper Type in Auto Paper Selection
• Default Cassette
• Default Magnification
• Auto Exposure Adjustment
• Auto OCR Exposure Adjustment
• Exposure Adjustment for Text + Photo Originals
• Exposure Adjustment for Text Originals
• Exposure Adjustment for Photo Originals
• Collate Copying
• Offset Copying
• Auto Rotation Copy
• Margin Width Default Value
• Border Erase Width Default Value
• Limit of Number of Copies
• Black Streaking Reduction Processing
How to Display the Copy Default Screen
Use the following procedure to display the Copy Default screen.
1 Press the System Menu/Counter key.
2 Press U or V to select Copy default, and then
press the Enter key.
Print Report
Job Accounting
System Menu / Counter:
Copy Default

Kyocera TASKalfa 181 Specifications

General

Print Technology	Laser
Type	Monochrome
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Manual
Memory	64 MB
Functions	Print, Copy, Scan
Print Speed	18 ppm
Copy Speed	18 cpm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Supported Operating Systems	Linux