Job Accounting
7-4 OPERATION GUIDE
4 Enter a one- to eight-digit ID-code using the
numeric keys.
A code from 0 to 99999999 can be input.
NOTE: If you try to register an ID-code that has been
already input, an error occurs. Enter another ID-code.
5 Press the Enter key.
NOTE: After the ID-code is registered, message
Please wait is displayed for several seconds.
6 Set the limit of use.
NOTE: For the method of setting the limit of use, see
Setting Limit of Use on page 7-4.
7 Press U or V to select End, and then press the
Enter key.
Setting Limit of Use
You can set the limit of use for each registered account.
The items that can be set are shown below.
Item Description of limit Reference page
Copy restriction Select whether to permit or prohibit copying.
Able to use: Permits copying.
Unable to use: Prohibits copying.
7-5
Print restriction Select whether to permit or prohibit printing.
Able to use: Permits printing.
Unable to use: Prohibits printing.
7-5
Output limit Set the limit of total count of copying and printing.
No limit: Does not set the limit of count.
Counter limit: Set the limit of count (0 to 999,999).
7-6
Scanner
transmission limit
Set the limit of count of scanner transmission if the optional
network scanner kit is installed.
No limit: Does not set the limit of count of scanner
transmission.
Counter limit: Set the limit of count of scanner transmission
(0 to 999,999).
Is not permitted: Prohibits use of scanner transmission.
7-6
To Next Page
Loading...
Need help?
General
