Printing Functions
5-34 OPERATION GUIDE
3 Press U or V to select the program to read, and
then press the Enter key.
The selected program is read from the memory
card.
4 Press the Reset key.
The message display returns to the printer basic
screen.
Writing Data
1 Display the Memory Card screen. (See How to
Display the Memory Card Screen on page 5-32.)
2 Press U or V to select Write Data, and then
press the Enter key.
3 Press U or V to select OK, and then press the
Enter key.
GO and CANCEL are displayed.
NOTE: If you select CANCEL and then press the Enter
key, data is not written.
4 Send data from your computer to this machine.
When the data is received, the message display of
this machine changes to Processing data.
When reception is complete, the message display
changes to Waiting.
5 Press U or V to select GO, and then press the
Enter key.
The data is written to the memory card.
Deleting Data
1 Display the Memory Card screen. (See How to
Display the Memory Card Screen on page 5-32.)
2 Press U or V to select Delete Data, and then
press the Enter key.
3 Press U or V to select the data to delete, and then
press the Enter key.
To Next Page
Loading...
Need help?
General
