Kyocera TASKalfa 181 User Manual

Job Accounting
OPERATION GUIDE 7-13
7
Default Settings
Adjust the default settings for job accounting.
You can set the following items in default settings.
• Copier Job Accounting (page 7-13)
• Printer Job Accounting (page 7-14)
• Scanner Job Accounting (page 7-14)
• Fax Job Accounting (page 7-15)
• Operation against Excess over Limit (page 7-15)
Copier Job Accounting
You can select whether or not to enable job accounting for the copier functions.
1 Display the Job Accounting screen. (See How to
Display the Job Accounting Screen on page 7-3.)
2 Press U or V to select Job Accounting Def.
Set, and then press the Enter key.
3 Press U or V to select Copy Job Account, and
then press the Enter key.
4 Press U or V to select Off or On, and then press
the Enter key.
5 Press U or V to select End, and then press the
Enter key.
Job Accountg Def . Set.
Job Accounting :
Each Job Accounting TL
Edit Job Accounting
[]On
Prnt Job Account .
Job Accounting Default Setting
End
Copy Job Account . : On
:
On
Copy Job Accounting :
Off
On
*
Prnt Job Account .
Job Accounting Default Setting
End
Copy Job Account . : On
: On

Kyocera TASKalfa 181 Specifications

General

Print Technology	Laser
Type	Monochrome
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Manual
Memory	64 MB
Functions	Print, Copy, Scan
Print Speed	18 ppm
Copy Speed	18 cpm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Supported Operating Systems	Linux