Part Names
1-4 OPERATION GUIDE
Automatic Cassette Switching Function
If multiple cassettes contain the same size paper and the paper in one cassette runs out during copying, the
automatic cassette switching function will switch paper feed from the empty cassette to the other cassette that
still contains paper.
NOTE: This machine can be also switched the paper source from cassette to MP tray.
The automatic cassette switching function can be turned off. For details, refer to Auto Cassette Switching on
page 6-14.
The paper in both cassettes must be set in the same orientation.
Message Display
The message display on this machine indicates the operation status of the machine.
Copier Basic Screen
This screen is displayed when the Copy key is pressed.
Reference number Meaning
1 Indicates the current status of the machine and displays the message for required operation.
2 Displayed when the original size is automatically selected.
3 Displays the copy magnification ratio. (Refer to 4-5)
4 Displayed in the auto paper selection mode.
5 Displays the original size, paper size, and selected cassette.
6 Displays the number of copies.
To Next Page
Loading...
Need help?
General
