Kyocera TASKalfa 181 User Manual

Copying Functions
4-4 OPERATION GUIDE
Selecting Image Quality
Select image quality suited to the type of original.
The table below shows the quality options.
The procedure for selecting the quality of copies is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press the image quality mode select key to select
the desired mode.
4 Press the Start key to start copying.
NOTE: You can adjust the copy exposure in each of the image quality modes. (See Density Adjustment for
Text + Photo Originals on page 6-8, Density Adjustment for Text Originals on page 6-8 and Density Adjustment
for Photo Originals on page 6-9.)
If you select the Photo mode, the manual copy exposure mode is set. (See Adjusting Density on page 4-3.)
Image quality mode Description
Text + Photo For originals with both text and photographs.
Text For originals primarily consisting of text.
Photo For photos taken with a camera.

Kyocera TASKalfa 181 Specifications

General

Print Technology	Laser
Type	Monochrome
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Manual
Memory	64 MB
Functions	Print, Copy, Scan
Print Speed	18 ppm
Copy Speed	18 cpm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Supported Operating Systems	Linux