Kyocera TASKalfa 181 User Manual

Copying Functions
OPERATION GUIDE 4-29
4
Auto Image Rotation
Automatically rotates the image when the sizes of the original and the loaded paper matches but the orientations
are different. The images will be rotated 90° counter-clockwise prior to copying.
NOTE: The paper sizes that can be used for auto rotation are A4/11 x 8 1/2" or smaller sizes. A3, B4, Folio, 11
x 17" (Ledger), 8
1/2 x 14" (Legal) or 8K cannot be used for auto rotation.
You can select whether or not to enable auto rotation at a default setting. Refer to Auto Rotation Copy on page
6-10.
The procedure for making copies using Auto Image Rotation is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press the Function key.
4 Press U or V to select Auto Rotation, and then
press the Enter key.
5 Press U or V to select On or Off, and then press
the Enter key.
6 Press the Start key to start copying.
Auto Rotation
Function :
Orig. Orient .
Continuous Scan
:
:
Top Edge
Off
:On
Auto Rotation :
Off
On
*

Kyocera TASKalfa 181 Specifications

General

Print Technology	Laser
Type	Monochrome
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Manual
Memory	64 MB
Functions	Print, Copy, Scan
Print Speed	18 ppm
Copy Speed	18 cpm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Supported Operating Systems	Linux