3-8
Preparation before Use > Touch Panel Display
Display for Originals and Paper
The copy screen displays the selected paper source and output tray.
Display of keys that cannot be set
Keys of features that cannot be used due to feature combination restrictions or non-installation of options are in a non-
selectable state.
Normal Grayed out Hidden
In the following cases, the key
is grayed out and cannot be
selected.
• Cannot be used in
combination with a feature
that is already selected.
• Use prohibited by user
control.
• [Preview] has been
pressed.
(Refer to Original Preview
on page 3-9)
Cannot be used because an
option is not installed.
Example: When a document
finisher (1,000-
Sheet Finisher or
4,000-Sheet
Finisher) is not
installed, [Staple/
Punch] does not
appear.
If a key that you wish to use is grayed out, the settings of the previous user may still be in effect. In this case, press the
[Reset] key and try again.
If the key is still grayed out after the [Reset] key is pressed, it is possible that you are prohibited from using the
function by user control. Check with the administrator of the machine.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
