5-60
Operation on the Machine > Using a Custom Box
3 Set the paper selection, duplex printing, etc., as desired.
For the features that can be selected, refer to Custom Box (Store File, Printing, Send) (page 6-6).
If a document stored from a computer is selected, the print settings selection screen appears.
• To use the settings used at the time of printing (when the document was saved), press
[Print As Is]. Press [Start Print] to start printing.
• To change the print settings, press [Print after Change Settings] and change the print
settings.
After a document saved in the machine is selected, the [Use File Settings] key may
appear in the setting screen for the feature to be used.
• To use the settings saved with the document, press [Use File Settings].
• If you need to change the print settings, press [Print after Change Settings].
4 Press the [Start] key. Printing of the selected document begins.
Sending Documents (Send)
The procedure for sending documents in a custom box is explained below.
1
Display the screen.
1 Press [Custom Box] on the Home screen.
2 Select the box containing the document you want to send.
3 Press [Open].
2
Send the document.
1 Select the document you wish to send by checking the checkbox.
The document is marked with a checkmark.