Kyocera TASKalfa 4551ci User Manual

2-33
Installing and Setting up the Machine > Command Center RX
Command Center RX
If the machine is connected to the network, you can configure various settings using Command Center RX.
This section explains how to access Command Center RX, and how to change security settings and the host name.
For details on Command Center RX, refer to the Command Center RX User Guide.
Settings that the administrator and general users can configure in Command Center RX are as follows.
*1 Displayed only when the optional FAX Kit is installed.
*2 The logged in user may not be able to configure some settings, depending on the permissions of the user.
NOTE
To fully access the features of the Command Center RX pages, enter the User Name and Password and click [Login].
Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below.
* Upper case and lower case letters are distinguished (case sensitive).
Setting Description
Administ-
rator
General
User
Device
Information
The machine's structure can be checked.
[Configuration], [Counter], [About Command Center RX]
❍❍
Job Status Displays all device information, including print and scan jobs, storing jobs,
scheduled jobs, and job log history.
[Printing Jobs Status], [Printing Job Log], [Sending Job Status],
[Scheduled Jobs], [Sending Job Log], [Storing Job Status],
[Storing Job Log]
❍❍
Document Box Add or delete document boxes, or delete documents within a document box.
[Custom Box], [FAX Box]*
1
, [Polling Box]*
1
, [Job Box Settings]
❍❍*
2
Address Book Create, edit, or delete addresses and address groups.
[Machine Address Book], [External Address Book Settings],
[One Touch Key]
❍❍*
2
Device Settings Configure the advanced settings of the machine.
[Paper/Feed/Output], [Original Settings], [Energy Saver/Timer], [Date/Time],
[System]
❍ -
Function Settings Configure the advanced function settings.
[Common/Job Defaults], [Copy], [Printer], [E-mail], [Scan to Folder],
[DSM Scan], [FAX / i-FAX]*
1
, [Send and Forward], [RX/Forward Rules]*
1
,
[Operation Panel]
❍ -
Network Settings Configure the network advanced settings.
[General], [TCP/IP], [Protocol]
❍ -
Security Settings Configure the security advanced settings.
[Device Security], [Send Security], [Network Security], [Certificates]
❍ -
Management
Settings
Configure the advanced management settings.
[Job Accounting], [Authentication], [ID Card], [Notification/Report],
[History Settings], [SNMP], [System Stamp], [Message Board], [Reset]
❍ -
NOTE
The optional FAX Kit is required in order to make use of fax functionality.
Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the FAX
Operation Guide.
Login User Name Admin
Login Password Admin

Kyocera TASKalfa 4551ci Specifications

General

Duplex printing	Yes
Print technology	Laser
Duplex printing mode	Auto
Time to first page (black, normal)	3.9 s
Time to first page (color, normal)	5.1 s
Print speed (black, normal quality, A3)	22 ppm
Print speed (black, normal quality, A4/US Letter)	45 ppm
Copier resize	25 - 400 %
Maximum number of copies	999 copies
N-in-1 copy function (N=)	2, 4
Scan to	E-mail, FTP, USB
Maximum scan area	A3 (297 x 420) mm
Scan speed (color)	160 ppm
Image formats supported	JPG, TIF
Faxing	Color faxing
Fax memory	12 MB
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)	200 x 100 DPI
Fax transmission speed	3 sec/page
Digital sender	No
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	- pages per month
Number of print cartridges	4
Page description languages	Microsoft XPS, PCL 5c, PCL 6, PCL XL
Paper input type	Cassette, Paper tray
Total input capacity	1150 sheets
Total output capacity	250 sheets
Maximum input capacity	7650 sheets
Total number of input trays	3
Multi-Purpose tray input capacity	150 sheets
Maximum print size	297 x 420 mm
Duplex media weight	60 - 256 g/m²
Paper tray media types	Banner, Envelopes, Plain paper
Paper tray media weight	60 - 220 g/m²
ISO A-series sizes (A0...A9)	A3, A4
Multi-purpose tray media types	Plain paper
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	60 - 300 g/m²
Display	LCD
Product color	Gray
Market positioning	Business
Direct printing	-
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	2
Processor model	P1022
Processor family	PMC-Sierra
Internal storage capacity	320 GB
Sound power level (standby)	38.3 dB
Sound pressure level (printing)	50.9 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	200 W
Power consumption (PowerSave)	1.8 W
Power consumption (average operating)	1030 W
Sustainability certificates	RoHS

Weight and Dimensions

Depth	767 mm
Width	668 mm
Height	747 mm