6-4
Using Various Functions > Functions Available on the Machine
Send
To configure the settings for functions, select the tab and press the function key.
For details on each function, see the table below.
Tab Function key Description
Reference
page
Configure the settings
for original type and
file format.
Original Size Specify the original size to be scanned. page 6-12
Mixed Size Originals Scans all sheets in the document processor, even if
they are of different sizes.
page 6-14
2-sided/Book
Original
Select the type and orientation of the binding based on
the original.
page 6-64
Original Orientation Select the orientation of the original document top
edge to scan correct direction.
page 6-16
Sending Size Select size of image to be sent. page 6-65
File Format Specify the image file format. Image quality level can
also be adjusted.
page 6-66
File Separation Creates several files by dividing scanned original data
page by page before sending the files.
page 6-69
Long Original Reads long-sized original documents using a
document processor.
Refer to the
FAX Operation
Guide
.
Configure the settings
for density, quality of
copies, and color
balance.
Density Adjust density using 7 or 13 levels. page 6-22
Original Image Select original image type for best results. page 6-23
Scan Resolution Select fineness of scanning resolution. page 6-69
FAX TX Resolution Select fineness of images when sending FAX. Refer to the
FAX Operation
Guide
.
Color Selection Select the color mode setting. page 6-24
Sharpness Adjusts the sharpness of image outlines. page 6-30
Background Density
Adj.
Removes dark background from originals, such as
newspapers.
page 6-30
Prevent Bleed-thru Hides background colors and image bleed-through
when scanning thin original.
page 6-31
To Next Page
Loading...
Need help?
General
Weight and Dimensions
