2-20
Installing and Setting up the Machine > Installing Software
Setting WIA Driver
Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 7.
1
Display the screen.
1 Click [Start] button on the Windows and enter [Scanner] in [Program and File Search].
Click [View scanners and cameras] in the search list then the Scanners and Cameras
screen appears.
In Windows 8, click [Search] in charms, and then [Settings], and enter "Scanner" in the search box.
Click [View scanners and cameras] in the search list then the Scanners and Cameras screen
appears.
2 Select the same name as this machine from WIA Drivers, and press [Properties].
2
Configure WIA Driver.
Enter the machine IP
addresses or host name.
1
2
When user login administration is enabled
Select the checkbox beside [Authentication], and enter Login User
Name (up to 321 characters) and Password (up to 64 characters).
When job accounting is enabled, select the checkbox beside
[Account], and enter the account ID as many as eight digits.
5
6
When using SSL, select
the checkbox beside
SSL.
3
4
Set units of measurement.