LeCroy WaveRunner XI Series User Manual

OPERATOR’S MANUAL
WRXi-OM-E Rev C 127
Histo a parametegram of the values of r
Tra ck of the values of a parameter
Tre
Resampling To Deskew
never you n engths of cables, probes
cause timing mismatches between signals. Resample a signal on one channel and adj
signal on another channel.
pling
1. In the menu ba .
2. Touch a math f The number of math traces av software
options loaded Specifications..
3. Touch the sing
4. Touch inside th ource: channel, math trace, memory location.
the skew from the Functions catego
on the right, touch the Deskew tab.
7. Touch inside the Delay by field and type in a time value, using the pop-up ke
Rescaling and Assigning Units
This feature allows you to apply a multiplication factor (a) and additive constant (b ou
can do it in the unit of your choice, depending on the type of application.
Allowable unit abbreviations are as follows:
nd of the values of a parameter
Deskew whe eed to compensate for different l , or anything else that might
ust it in time relative to a
Resam
r, touch Math, then Math Setup
unction trace tab F1 through Fx
on your oscilloscope. See
le function button.
e Source1 field and select a s
.. in the drop-down menu.
ailable depends on the
5. Touch inside
6. In the dialog
Operator1 field and select De ry.
ypad.
) to your waveform: aX + b. Y
(blank)
no units
A
Ampere
C
Coulomb
CYCLE
cycles
DB
Decibel
DB
De
C
cibel referred to carrier
DBM
Decibel Milliwatt
DBV
Decibel Volts
DBUZ
Decibel Microamp
DEC
Decade
DIV
Divisions
Event
Events
F
Farad
G
Gram
H
Henry

LeCroy WaveRunner XI Series Specifications

General

Brand	LeCroy
Model	WaveRunner XI Series
Category	Test Equipment
Language	English