OPERATOR’S MANUAL
Manually Setting the Date and Time
1. Touch Utilities Æ Utilities Setup... from the menu bar.
2. Touch the Date/Time tab.
nute, Second, Day, Month, and Year fields and enter a value, using the
2. Ensure the oscilloscope is connected to the Internet through the LAN connector on the back of the device.
3. Touch Utilities Æ Utilities Setup... from the menu bar.
4. Touch the Date/Time tab.
5. Touch the Set from Internet button.
Setting the Date and Time from Windows
1. Touch Utilities Æ Utilities Setup... from the menu bar.
2. Touch the Date/Time tab.
3. Touch the Windows Date/Time button.
3. Touch inside each of the Hour, Mi
pop-up numeric keypad.
4. Touch the Validate Changes button.
Setting the Date and Time from the Internet
1. The Simple Network Time Protocol (SNTP) is used.
Use the Date and Time Properties window to configure the time, including time zone.
Options
Use this dialog to add or remove software options. For information about software options, contact your local
LeCroy Sales and Service office, or visit our Web site at http://www.lecroy.com/options.
Options that you purchase, such as JTA2, add performance to you instrument. This added performance is seen in
the new math functions or parameters that you can choose from when doing Measure or Math setups.
WRXi-OM-E Rev C 163
To Next Page
Loading...
Need help?
General
