Leica GR10 User Manual

6: Context sensitive help
99
Status: Receiver information
Status: Receiver information - Receiver
Background information
Provides an overview of receiver specific information such as serial number, installed firmware version and installed options.
Field description
The table below describes the fields in the Status: Receiver information / Receiver tab.
Press the Refresh icon
to update the displayed data.
Instrument details
Description
Instrument type
The receiver type.
Serial number
Serial number of the receiver.
Site code
Four digit identifier for the receiver.
This is also used as the first four characters of the raw data (MDB) and RINEX file name
created on the receiver.
System language
The language loaded on the receiver.
ME serial number
The serial number of the measurement engine.
ME Hardware
The hardware revision of the measurement engine.
The default functionality section, list the options that are installed per default on each GR/GM Series receiver.
Default functionality
Description
Ethernet
Ethernet connection is available on every GR/GM Series receiver.
GNSS Spider OWI
The Leica GNSS Spider software can connect and control any GR/GM Series receiver
per default. No additional option is needed.
Loaded firmware
Description
Maintenance end
The expiry date of the software maintenance contract.
For information on Custom Care Packages
visit the Leica Geosystems web page or
contact your local Leica Geosystems representative.
Firmware
The firmware version (build number) loaded on the receiver.
If a new firmware version is available, all GR/GM receivers connected to the Internet will
show the message, A new firmware version is available on the Leica website.
Receivers with automatic firmware upload and installation active, will install the new
firmware when it is available.
Go to Receiver setup / Tools, Firmware tab to download the new firmware file.
ME Firmware
The firmware version of the measurement engine.
ME Boot
The firmware version of the boot software for the Measurement Engine.
Navigation software
The navigation firmware version with the algorithms for signal processing.
LB2 / OWI
The version number of the LB2/OWI commands.
Operating system
The firmware version of the Windows CE operating system.
EFI loader
The firmware version of the Electronic Front Interface loader.
EFI
The firmware version of the Electronic Front Interface.
XLDR
The firmware version of the XLDR loader component of the operating system.
EBoot
The version of the Eboot loader component of the operating system.
CHAIN
The version of the CHAIN loader component of the operating system.
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and

Leica GR10 Specifications

General

Brand	Leica
Model	GR10
Category	Receiver
Language	English