To Next Page

To Previous Page

Operational Manual (Online Help)

Before Installation

Installation location

It is recommended that the instrument is installed so that it is

• protected from mechanical influences and lightning.

• within 70 m of the antenna, without the need to use inline amplifiers.

• located sufficiently far enough away from potential sources of radio frequency interference. High-power signals from

nearby radio, radar or GSM/GPRS/UMTS cell towers can cause problems with GNSS tracking. Such interference is

not harmful to the instrument but could cause a loss of GNSS data.

Installation orientation

•

For inside assembly, the instrument can be installed in any direction

• When installing the instrument outside, orientate the instrument vertically so that the connector points are pointing

downwards

Cable installation

Ensure that the cables between the instrument and antenna are positioned to prevent them from becoming bent, stretched or

squeezed. For the installation of the cables, the general rules for the installation of electrical wiring apply.

Please consider that a well-planned and thoroughly carried out electric installation not only protects the cables against damage,

but also looks professional.

For detailed installation information, refer to the GNSS Reference Station and Networks - An Introductory Guide.

Leica GR10 User Manual

Other manuals for Leica GR10