6: Context sensitive help
153
Outgoing data stream wizard: Configure NMEA data stream
Setting Descriptions
The table below describes the settings that can be configured on the Configure NMEA data stream page.
Activate or deactivate the NMEA message check boxes that are to be output.
A detailed description of each NMEA message is contained in Appendix B: NMEA Messages.
Select the data rate for the NMEA messages.
The selected NMEA messages will be sent out immediately at the selected rate.
The position update rate of a high rate (>1 Hz ) NMEA stream depends on:
• the data rate of an incoming correction data stream,
• the data rate of an outgoing data stream,
• the logging rate.
Select positioning mode "Network RTK" in order to have updated positions in a high rate NMEA stream
also without e.g. having a high rate incoming data stream.
Press
to go back to the previous wizard step. Press to continue to the next wizard step.
Press
to cancel and return to GNSS management: Outgoing data stream.
Related Topics
Incoming data stream wizard: Configure real time in data stream
To Next Page
Loading...
Need help?
General
