Operational Manual (Online Help)
108
Status tracking: GALILEO
Field Description
The table below describes the fields in the Status: GALILEO tab.
The information shown is dependent on the settings configured on the GNSS management: Tracking page and which satellite
options are available on the receiver.
Press the Refresh icon
to update the displayed data.
The Pseudo Random Noise (PRN) number of the satellite.
The elevation of the satellite in degrees. An arrow is shown to indicate if the satellite is rising or
setting.
The azimuth of the satellite in degrees.
The signal to noise ratio on E1. The number is shown in brackets if the signal is not currently being
used in the position calculations.
The signal to noise ratio on E5a. The number is shown in brackets if the signal is not currently being
used in the position calculations.
The signal to noise ratio on E5b. The number is shown in brackets if the signal is not currently being
used in the position calculations.
The signal to noise ratio on Alt-Boc. The number is shown in brackets if the signal is not currently
being used in the position calculations.
Lists the PRN numbers of the healthy satellites.
Lists the PRN numbers of the unhealthy satellites. The satellites are available in the almanac but are
flagged unhealthy.
Lists the PRN numbers of the unavailable satellites. The satellites are not available in the almanac.
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
If the health status of a satellite is changed by a user and is different to what is sent in the broadcast
ephemeris, this satellite is shown in brackets. Go to GNSS management: Tracking to change the health
status of a satellite.
Related topics
Tracking: General
Tracking: GPS
Tracking: GLONASS
Tracking: SBAS
Tracking: BEIDOU
Tracking: QZSS
GNSS management: Tracking
To Next Page
Loading...
Need help?
General
