Operational Manual (Online Help)
18
General Information
Design
The GR/GM Series
• is designed for a variety of permanent and semi-permanent reference station applications including network RTK,
single base station, scientific, campaign, monitoring and seismic studies
• collects, stores and disseminates GNSS data
• is highly suited to system integration
• supports a variety of external devices including communication, meteo and tilt
Special features GR/GM10 & GR25
•
50 Hz data logging and streaming.
• SmartTrack+ measurement engine for higher accuracy and availability.
• Up to 10 multiple logging sessions and 20 data streams.
• Multiple data storage formats including MDB, RINEX and Hatanaka.
• Supports high capacity storage up to 32 GB and intelligent Smart clean-up.
• Multiple data output formats including Leica, Leica 4G, RTCM 2.x,3.x, LB2, BINEX, CMR, CMR+.
• Modern, user friendly Web interface GUI, available in different languages.
• Seamless integration with Leica GNSS Spider.
• Robust lightweight metal housing.
• Fully ruggedised to IP67, including a ruggedised Ethernet port.
• Simple mounting for IT rack, cabinet and wall mount. Receiver is also stackable.
• Built in communications Slot-in port.
• Integrated device management for external devices.
• Supports DHCP, DNS, DynDNS and mobile internet.
• Improved security including IP filtering, access management and HTTPS with custom SSL.
• Out of the box plug and play hostname setup.
• Wide supply voltage 10.5-28 V.
• Low-power consumption, with 3.0-3.5 W typical.
• External Oscillator Port
• USB Client Port
Special features GR25 only
In addition, the GR25 instruments are equipped with several special features:
• Integrated screen and keypad.
• Internal battery and charger.
• USB host port.
• Power over Ethernet.
• Bluetooth or WLAN.
• PPS and event port.
To Next Page
Loading...
Need help?
General
