Lenze 8400 StateLine C User Manual

Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011 L 329
8400 StateLine C | Reference manual
Technology applications
TA "Switch-off positioning"
7.3.3 Terminal assignment of the control modes
The following comparison provides information about which inputs/outputs of the application block LA_SwitchPos are
interconnected to the digital and analog input/output terminals of the drive controller in the different control modes.
Control mode (C00007)
10: Terminals 0 12: Terminals 2 14: Terminals 11 16: Terminal 16 20: Keypad 21: PC 30: CAN 40: MCI
Digital input terminals
X4/RFR Controller enable Controller enable / Reset of error message
bFailReset
X4/DI1 Fixed setpoint 1/3
bJogCtrlJog1
Stop function 1
bJogCtrlStop1
Fixed setpoint 1/3
bJogCtrlJog1
- - Stop function 1
bJogCtrlStop1
X4/DI2 Fixed setpoint 2/3
bJogCtrlJog2
Stop function 2
bJogCtrlStop2
Selection: Pre-switch off
1
bJogCtrlSlowDown 1
Fixed setpoint 2/3
bJogCtrlJog2
- - Selection: Pre-switch off 1
bJogCtrlSlowDown 1
X4/DI3 Reset error message
bFailReset
CW rotation quick stop
bRLQCw
Selection: Switch-off position 1
bJogCtrlInputSel1
CW rotation quick stop
bRLQCw
- - Stop function 2
bJogCtrlStop2
X4/DI4 Change of direction of
rotation
bSetSpeedCcw
CCW rotation quick stop
bRLQCcw
Selection: Switch-off position 2
bJogCtrlInputSel2
CCW rotation quick stop
bRLQCcw
- - Selection: Pre-switch off 2
bJogCtrlSlowDown 2
Analog input terminals
X3/A1U, A1I Main speed setpoint
nMainSetValue_a
10 V ≡ 100 % reference speed (C00011
)
- - Additional speed setpoint
nAuxSetValue_a
10 V ≡ 100 % reference speed (C00011
)
Digital output terminals
X4/DO1 - - - - - - - -
X101/COM, NO
- - - - - - - -
Analog output terminal
X3/O1U - - - - - - - -
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Lenze 8400 StateLine C Specifications

General

Brand	Lenze
Model	8400 StateLine C
Category	Inverter Drive
Language	English