MMX6x2-HT
User’s Manual
Section 5. Installation and operation Page 43 / 119
5.4.7. Device Presets menu
The matrix has 4 user programmable presets. Each preset stores the full configuration of
the matrix. All presets are stored in a non-volatile memory; the matrix keeps presets even
in the case of power down. This is the same as using the backup-restore feature of
Lightware Device Controller software (see section 6.10 on page 64), but in this case, the
settings are stored in the matrix.
The list of the stored parameters and values can be found in section 10.3 on page 114.
Run a preset
Step 1. Navigate to Device Presets / Run Preset submenu and
press the enter button.
Step 2. Press the enter button to activate the Run Preset
submenu. Use the up ▲ and down ▼ buttons to
toggle between the preset memories.
Step 3. Press the enter button to run the Preset. The
configuration is restored.
Save a preset
Step 1. Navigate to Device Presets / Save Preset submenu
and press the enter button.
Step 2. Press the enter button to activate the Save Preset
submenu. Use the up ▲ and down ▼ buttons to
toggle between the preset memories.
Step 3. Press the enter button to save the Preset. The
configuration is stored.
Delete a preset
Step 1. Navigate to Device Presets / Delete Preset submenu
and press the enter button.
Step 2. Press the enter button to activate the Delete Preset
submenu. Use the up ▲ and down ▼ buttons to
toggle between the preset memories.
Step 3. Press the enter button to delete the Preset. The
preset memory is erased.
5.4.8. Info menu
The Info menu displays basic information: the serial number and part number of the matrix;
details about the firmware of the CPU and other controllers.
¹Device Presets
»Run Preset º
¹Run Preset:
P1:1 preset »
¹Device Presets
½Save Preset º
¹Save Preset:
P1:1 preset »
¹Device Presets
¼Delete Presetº
¹Delete Preset:
P1:1 preset »
To Next Page
Loading...
Need help?
General
