Matrix Sparsh VP110 User Manual

118 Matrix SPARSH VP110 User Guide
Area Code
Area codes are also known as Numbering Plan Areas (NPAs).They usually indicate geographical areas in a
country. This feature is necessary only when dialing the number outside the code area. For example, area code is
configured as “Code: 0592, Min Length: 4,Max Length: 11”, then when you dial out the number “56789”, which has
the digits between 4 to 11, the phone will add the area code and dial out the number “059256789”. You can only
configure one area code rule on your phone.
Procedure
Area code rule can be configured using the configuration files or locally.
To configure the area code via web user interface:
• Click on Settings->Dial Plan->Area Code.
• Enter the desired values in the Code, Min Length(1-15) and Max Length(1-15) fields.
• Click Confirm to save the change.
ConfigurationFile <MAC>.cfg
Createtheareacoderuleandspecify
themaximumandminimumlengthsof
enterednumbers.
Formoreinformation,refer“Appendix
D‐ConfigurationParameters”.
Local WebUserInterface
Createtheareacoderuleandspecify
themaximumandminimumlengthsof
enterednumbers.
Navigateto:
http://<phoneIPAddress>/
servlet?p=settings‐areacode&q=load

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English