Matrix SPARSH VP110 User Guide 333
The following shows an example of a super search template:
<root_super_search>
<item id_name="local_directory_search" display_name="Local Directory" priority="1" enable="1" />
<item id_name="calllog_search" display_name="History" priority="2" enable="1" />
<item id_name="remote_directory_search" display_name="Remote Phone Book" priority="3" enable="0" /
>
</root_super_search>
Local Contact File
You can add contacts one by one on the IP phone directly. You can also add multiple contacts at a time and/or
share contacts between IP phones using the local contact template file. After setup, place the template file to the
provisioning server and specify the access URL of the template file in the configuration files.
When editing a local contact template, learn the following:
• <root_contact> indicates the start of a contact list and </root_contact> indicates the end of a contact list.
• <root_group> indicates the start of a group list and </root_group> indicates the end of a group list.
• When specifying a ring tone for a contact or a group, the format of the value must be Auto (the first
registered line), Resource:RingN.wav (system ringtone, integer N ranges from 1 to 5) or
Custom:Name.wav (custom ringtone).
• When specifying a desired line for a contact, the valid values are 0 and line ID, 0 stands for the first
available account. Multiple line IDs are separated by commas.
• At most 5 groups can be added to the IP phone.
• At most 1000 local contacts can be added to the IP phone.
Procedure
Use the following procedures to customize a local contact template file.
To customize a local contact file:
• Open the template file using an ASCII editor.
• For each group that you want to add, add the following string to the file. Each starts on a separate line:
<group display_name="" ring=""/>
Where:
display_name=""specifies the name of the group.
ring="" specifies the desired ring tone for this group.
• For each contact that you want to add, add the following string to the file. Each starts on a separate line:
To Next Page
Loading...
Need help?
General
