Matrix Sparsh VP110 User Manual

316 Matrix SPARSH VP110 User Guide
TR-069 Device Management
TR-069 is a technical specification defined by the Broadband Forum, which defines a mechanism that
encompasses secure auto-configuration of a CPE (Customer-Premises Equipment), and incorporates other CPE
management functions into a common framework. TR-069 uses common transport mechanisms (HTTP and
HTTPS) for communication between CPE and ACS (Auto Configuration Servers). The HTTP(S) messages contain
XML-RPC methods defined in the standard for configuration and management of the CPE.
TR-069 is intended to support a variety of functionalities to manage a collection of CPEs, including the following
primary capabilities:
• Auto-configuration and dynamic service provisioning
• Software or firmware image management
• Status and performance monitoring
• Diagnostics
The following table provides a description of RPC methods supported by IP phones.
RPCMethod
Description
GetRPCMethods
Thismethodisusedtodiscoverthesetofmethodssupportedbythe
CPE.
SetParamet erValues
ThismethodisusedtomodifythevalueofoneormoreCPE
parameters.
GetParameterValues
ThismethodisusedtoobtainthevalueofoneormoreCPE
parameters.
GetParameterNames
Thismethodisusedtodiscovertheparametersac
cessibleona
particularCPE.
GetParameterAttributes
Thismethodisusedtoreadtheattributesassociatedwithoneor
moreCPEparameters.
SetParamet erAttributes
Thismethodisusedtomodifyattributesassociatedwithoneor
moreCPEparameters.
Reboot ThismethodcausestheCPEtoreboot.
Download
ThismethodisusedtocausetheCPEtodownloadaspec
ifiedfile
fromthedesignatedlocation.
FiletypessupportedbyIPphonesare:
•FirmwareImage
• ConfigurationFile
Upload
ThismethodisusedtocausetheCPEtouploadaspecifiedfi letothe
designatedlocation.
FiletypessupportedbyIPphonesare:
• ConfigurationFile
•LogFile
ScheduleInform
ThismethodisusedtorequesttheCPEtosche
duleaone‐time
Informmethodcall(sep aratefromitsperiodicInformmethodcalls)
sometimeinthefuture.
FactoryReset ThismethodresetstheCPEtoitsfactorydefaultstate.
TransferComplete
ThismethodinformstheACSofthecompletion(eithersuccessfulor
unsuccessful)ofafiletransferinitiatedbyanearlierDownloador
Up
loadmethodcall.
AddObject
Thismethodisusedtoaddanewinstanceofanobjectdefinedon
theCPE.
DeleteObject Thismethodisusedtoremoveaparticularinstanceofanobject.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English