Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 83
To add a group to the local directory via phone user interface:
• Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the directory by default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directory to enter the local
directory.
• Press the AddGrp soft key.
• Enter the desired group name in the Name field.
• Press to select the Ring Tones field and then press
or to select the desired group ring tone.
If Auto is selected, this group will use the ring tone assigned to the account. For more information on
ringtone for an account, refer “Ring Tones”.
• Press the Add soft key to save the change or the Back soft key to cancel.
Editing Groups
To edit a group in the local directory via phone user interface:
• Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the directory by default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directory to enter the local
directory.
• Select the desired group.
• Press the Option soft key, and then select Detail from the prompt list.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English