Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 329
To customize a dial-now template:
• Open the template file using an ASCII editor.
• Add the following string to the template, each starting on a separate line:
<Data DialNowRule="" LineID=""/>
Where:
DialNowRule="" specifies the dial-now rule.
LineID="" specifies the desired line(s) for this rule. When you leave it blank or enter 0, this dial-now rule will
apply to all lines.
• Specify the values within double quotes.
• Place this file to the provisioning server.
The following shows an example of a dial-now template:
<DialNow>
<Data DialNowRule="1234" LineID="0"/>
<Data DialNowRule="52[0-6]" LineID="0"/>
<Data DialNowRule="xxxxxx" LineID=""/>
</DialNow>
Softkey Layout Template
The softkey layout template allows you to customize soft key layout for different call states. The call states include
CallFailed, CallIn, Connecting, Dialing, RingBack and Talking. After setup, place the templates to the provisioning
server and specify the access URL in the configuration files.
When editing a softkey layout template, learn the following:
• <Call States> indicates the start of a template and </Call States> indicates the end of a template. For
example, <CallFailed></CallFailed>.
• <Disable> indicates the start of the disabled soft key list and </Disable> indicates the end of the soft key
list. The disabled soft keys are not displayed on the LCD screen.
• Create disabled soft keys between <Disable> and </Disable>.
• <Enable> indicates the start of the enabled soft key list and </Enable> indicates the end of the soft key list.
The enabled soft keys are displayed on the LCD screen.
• Create enabled soft keys between <Enable> and </Enable>.
• <Default> indicates the start of the default soft key list and </Default> indicates the end of the default soft
key list. The default soft keys are displayed on the LCD screen by default.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English