Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 167
• Enter the destination number you want to forward all incoming calls to when the phone is busy in
the Forward to field.
• (Optional.) Enter the busy forward on code or off code respectively in the On Code or Off Code
field.
• If you select No Answer Forward:
• Press or , or the Switch soft key to select Enable from the No Answer field.
• Enter the destination number you want to forward all unanswered incoming calls to in the Forward
to field.
• Press or , or the Switch soft key to select the ring time to wait before forwarding from the
After Ring Time field.
The default ring time is 12 seconds.
• (Optional.) Enter the no answer forward on code or off code respectively in the On Code or Off
Code field.
• Press the Save soft key to save the change or the Back soft key to cancel.
The icon on the idle screen indicates call forward is enabled.
• You can also enter the SIP URL or IP address in the Forward to field. For more information on using the
SIP URL or IP address, refer “Placing Calls”.
• Call forward is local to the phone, and may be overridden by the server settings.Call forward on code or
off code may be different between servers. For more information, contact your ITSP.
To disable call forward in phone mode:
Do one of the following:
• Press when the phone is idle.
• Press Menu->Features->Call Forward.
• Press or to select the desired forwarding type, then press the Enter soft key.
• Press or , or the Switch soft key to select Disable to disable the call forward.
• Press the Save soft key to save the change.
Dynamic Forwarding
To forward an incoming call to another party:
• When the phone is ringing, press the Fwd soft key.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English