Matrix Sparsh VP110 User Manual

172 Matrix SPARSH VP110 User Guide
Call Waiting
You can enable or disable call waiting on the phone. If call waiting is enabled, you can receive another call when
there is an active call on the phone. Otherwise, another incoming call is automatically rejected by the phone with a
busy message when there is an active call on the phone. You can also enable or disable the phone to play a
warning tone when receiving another call.
Procedure
Call waiting and call waiting tone can be configured using the configuration files or locally.
To configure call waiting via web user interface:
• Click on Features->General Information.
• Select the desired value from the Call Waiting list.
• (Optional.) Enter the call waiting on code in the Call Waiting On Code field.
ConfigurationFile <MAC>.cfg
Configure callwaitingandcallwaiting
tone.
Formoreinformation,refer“Appendix
D‐ConfigurationParameters”.
Local
WebUserInt erface
Configure callwaiting.
Navigateto:http://<phoneIPAddress>/
servlet?p=features‐general&q=load
Configure callwaitingtone.
Navigateto:
http://<phoneIPA ddress>/
servlet?p=features‐audio&q=load
PhoneUserInterface
Configure callwaitingandcallwaiting
tone.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English