Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 137
To place a call using the headset:
• With the optional headset connected, press to activate the headset mode.
• Enter the desired number using the keypad.
• Press OK , , or the Send soft key.
To permanently enable your headset, refer “Headset Prior”.
To place multiple calls:
You can have more than one call on your IP phone. To place a new call during an active call:
• Press the Hold soft key to place the original call on hold.
• Press the NewCall soft key.
• Enter the desired number using the keypad.
• Press OK , , or the Send soft key.
You can press or to switch between the calls, and then press the Resume soft key to retrieve the desired
call.
Answering Calls
When you are not in another call, you can answer a call in three ways:
• Using the handset
• Using the speakerphone
• Using the headset
• You can ignore incoming calls by pressing the Reject soft key or the Silence soft key. You can also
activate Do Not Disturb mode to ignore all incoming calls without ring on your phone. For more
information, refer “Do Not Disturb”.
• You can forward incoming calls to someone else by pressing the Fwd soft key. For more information,
refer “Call Forward”.
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
• Pick up the handset.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English