Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 249
Action URL
Action URL allows IP phones to interact with web server applications by sending an HTTP or HTTPS GET request.
You can specify a URL that triggers a GET request when a specified event occurs. Action URL can only be
triggered by the pre-defined events (e.g., log on). The valid URL format is: http(s)://IP address of the server/
help.xml?.
The following table lists the pre-defined events for action URL.
Event Description
SetupCompleted WhentheIPphonecompletesstartup.
Registered WhentheIPphonesuccessfullyregister sanaccount.
U nregistered WhentheIPphonelogsofftheregisteredaccount.
RegisterFailed WhentheIPphonefailstoregisteranaccount.
OffHook WhentheIPphoneisoffhook.
OnHook WhentheIPphoneisonhook.
IncomingCall WhentheIPphonereceivesanincomingcall.
OutgoingCall WhentheIPphoneplacesacall.
Established WhentheIPphoneestablishesacall.
Terminated WhentheIPphoneterminatesacall.
OpenDND WhentheIPphoneenablestheDNDmode.
CloseDND WhentheIPphonedisablestheDNDmode.
OpenAlwaysForward WhentheIPphoneenablestheal
waysforward.
CloseAlwaysForwar d WhentheIPphonedisablesthealwaysforward.
OpenBusyForward WhentheIPphoneenablesthebusyforward.
CloseBusyForward WhentheIPphonedisablesthebusyforward.
OpenNoAnswerForward WhentheIPphoneenablesthenoanswerforward.
CloseNoAnswerForward WhentheIPphonedisables thenoans
werforward
TransferCall WhentheIPphonetransfersacall.
BlindTransfer WhentheIPphoneblindtransfersacall.
AttendedTransfer
WhentheIPphoneperformsthesemi‐attended/attended
transfer.
Hold WhentheIPphoneplacesacallonhold.
UnHold WhentheIPphoneretrievesaholdcall.
Mute WhentheIPphonemutesaca
ll.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English