Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 73
To configure send key via phone user interface:
• Press Menu->Features->Key as Send.
•Press
or , or the Switch soft key to select # or * from the Key as Send field, or select Disable to
disable this feature.
• Press the Save soft key to save the change.
Keypad Lock
Phone lock is used to lock the IP phone to prevent it from unauthorized use. Once the IP phone is locked, a user
must enter the password to unlock it. IP phones offer three types of phone lock:
• Menu Key: The Menu soft key is locked. You cannot access the menu of the phone until unlocked.
• Function Keys: The function keys are locked. You cannot use the Message, Mute, RD, Transfer, √,
navigation keys and soft keys until unlocked.
• All Keys: All keys are locked except the Volume key. You are only allowed to dial emergency numbers;
answer incoming calls by lifting the handset, pressing the Speakerphone key, the Headset key or the √ key,
place an active call on hold by pressing the Hold soft key, resume the held call by pressing the Resume
soft key, and end the call by hanging up the handset or pressing the Speakerphone key.
The emergency number setting, if desired, must be made before lock activation.For more information, refer
“Emergency Number”.
The IP phone will not be locked immediately after the phone lock type is configured. One of the following steps is
also needed:
• Long press the pound key when the IP phone is idle.
• Press the keypad lock key (if configured) when the IP phone is idle.
In addition to the above steps, you can configure the IP phone to automatically lock the keypad after a period of
time.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English