INTERIOR
-
Seat Belts
6-9
Guide
Locked
(Pushbutton released)
Adjuster rail
4
Inward
Forward
ONE-TOUCH
PUSHBUlTON
TYPE ADJUSTABLE
SHOULDER BELT ANCHOR
The mechanism allows adjustment of shoulder belt anchor
height in five stages depending with the physique of the front
seat occupant. It consists of an adjuster rail, a slider and a
pushbutton provided on the seat belt sash guide.
The adjuster rail is secured to the center pillar and provided
with five holes in which the lock pin of the slider may fit.
The slider is so assembled to the adjuster rail that it may
move up and down along the rail. The lock pin is provided
in the slider to secure the slider in place.
The lock pin is always kept pressed to the rail by spring. De-
pressing the pushbutton against on the seat belt sash guide
will push the ring out of the sash guide. Then, the lever inside
the slider is pushed to lift the lock pin until the pin is disengaged
from the adjuster rail, making the slider movable up and down.
Each lock pin hole of the adjuster rail is provided with a guide
in the upward direction only so that the upward movement
of the seat belt anchor can be made without depressing the
pushbutton, improving the operability.
Unlocked
(Pushbutton depressed)
Lever
Pushbutton
Ring
Lock pin
1950060
CONSTRUCTION AND OPERATION OF THE BUCKLE
There is a spring installed in the portion connecting the buckle
to the arm, allowing the buckle to tilt forward and inward so
that the belts can be tight enough around the body.
To Next Page
Loading...
Need help?
General
