7-6
EQUIPMENT
-
Ignition Switch
IGNITION
SWITCH
N77ZEOOAA
The ignition key push type double-action ignition
switch is installed that prevents the steering wheel
from being locked up as a result of the ignition key
being inadvertently removed from the key cylinder
while the vehicle is in motion. This contributes to
greater safety.
For additional convenience, an ignition switch
illu-
mination light has been adopted which is lit at night
for approximately 10 seconds by the timer function
of the ETACS-ECU so that the ignition key can be
d
easily inserted.
NOTE
For the timer function of the ignition switch illumina-
tion light, refer to the section on the ETACS-ECU
on
P.7-23.
IGNITION KEY PUSH TYPE DOUBLE-ACTION IGNITION SWITCH <M/T>
A double-action lever has been provided in the steer-
ing lock cylinder, and a raceway for orbital motion
of the double-action lever and an ACC position stop-
per provided in the key cylinder to make sure that
the ignition key cannot be removed unless the driver
rotates it to the LOCK position, while pushing the
key in.
16X0940
/
Key cylinder
ACC
position stopper
16X0553
To Next Page
Loading...
Need help?
General
