Mitsubishi ECLIPSE Technical Information Manual

1-74
ENGINE <TURBO> - Control System
ACTUATORS AND CONTROL
FAN MOTOR RELAY (RADIATOR AIR CONDITIONING CONDENSER)
This relay controls the radiator fan and air condition-
control module.
ing condeser fan based on signals from the engine
N7l BK2OAA
GENERATOR G TERMINAL
N71 BK2SAA
The engine control module limits the generator out-
put current by duty control of the continuity between
generator terminal G and the ground.
--
I+
Trio diode
1
$-/$-I+ / 1: -------- &---------
- ’ ’
- a ’ - ’
=
II-+,
coil
u-
.
x f
I---
Field
I
coil
I
I I
’ ‘d
\-
I I
L ---_----_--------------
-------_ ---_
-----JI
Voltage regulator
\
111 3.
Generator
\
-_I
S terminal voltage: 14.4 V or more
Engine control module
lFUO889
When there is no continuity between generator ter-
minal G and the ground (let this be 100% duty),
transistor No. 1 (Trl) stays in the always ON state.
When the voltage at generator terminal S reaches
14.4 V, the power transistor is forced to OFF to
adjust the generator output voltage to 14.4 V. This
operation is the same as that of the conventional
generator.

Mitsubishi ECLIPSE Specifications

General

Brand	Mitsubishi
Model	ECLIPSE
Category	Automobile
Language	English