ENGINE <TURBO>
-
Fuel System
I-69
FUEL TANK
L
<FWD>
The fuel tank is the same as the one of the 420A
engine. (Refer to P. 1-12.)
<AWD>
The fuel tank is made from a high density polyethyl-
ene (HDPE) material and blow-formed into an inte-
gral tank.
The tank has an internally installed pump and gauge
assembly and pipe and gauge assembly. In addition,
a fuel cut-off valve assembly is provided to prevent
the leakage of the fuel that would occur when the
vehicle rolls over.
Pump and gauge assembly
\
Features
cAWD>
N716FOlAA
l Light weight
-
20% weight reduction as
compared with a steel tank
l
Increased tank capacity due to improved space
efficiency
l Highly rust-resistant
l
Use of a resin cap for better serviceability
l
Saddle-shaped tank striding across the exhaust
and power transmission systems for effective
use of the space under the body
I
I
Saddle-shaped tank
Fuel tank
AO~XOOSI
Protector
A03X0076
To Next Page
Loading...
Need help?
General
