Mitsubishi S12A2 User Manual

6-13
Chapter 6 INSPECTION AND REPAIR OF BASIC ENGINE
2.7 Camshaft Bushing - Replace
(1) Remove the camshaft bushing set bolt and remove the
camshaft bushing.
(2) Before inserting the camshaft bushing to the bushing
hole on the crankcase, be sure to check that the oil hole
and set bolt hole.
(3) Before securing the set bolt, be sure to check that the
set bolt is in alignment with the oil hole.
Camshaft Bushing - Install
Before tightening the set bolt, be sure to check that
the set bolt is in alignment with the set bolt hole in the
camshaft bushing.
Make sure that the oil hole in the camshaft bushing is
in alignment with the oil hole from the oil gallery.
Set bolt
Camshaft bushing
Set bolt hole
Oil hole
Engine
front

Mitsubishi S12A2 Specifications

General

Brand	Mitsubishi
Model	S12A2
Category	Engine
Language	English