8-17
Chapter 8 FUEL SYSTEM
2.2.1 Fuel Filter Cartridge - Install
(1) Remove dust and contaminants on the filter cartridge mating face.
(2) Apply clean fuel on the fuel filter gasket.
(3) After the fuel filter gasket comes into contact with the base, tighten the cartridge by 3/4 to 1 turn by hand.
Note: After the installation bleed air from the fuel system.
(4) Start the engine, and make sure that there is no fuel leaks.
(a) Make sure that there is no flame around the area before handling fuel.
(b) Wipe any spilled fuel to prevent a fire.
(c) Do not use the fuel filter cartridge that has a dent on the case. If the case has a dented, it can cause damage
to the fuel filter cartridge, leading to fuel leaks during operation, and results in a fire.
(a) When installing the fuel filter cartridge, do not use a filter wrench. Tighten it with your hand.
(b) Be careful not to dent or damage the surface of fuel filter cartridge.
To Next Page
Loading...
Need help?
General
