8-38
Chapter 8 FUEL SYSTEM
3.2.3 Fuel Control Link - Install and Adjust
Left-bank linkage - Overall view
5612
Governor lever
Stop lever
Control lever
Woodward PGS governor spec
Toho Seisakusho SG4017 actuator spec
Fuel injection pump
Distance from the end of
fuel injection pumptothe
hole center of rack end
Rack "0": 67.5 mm [2.60 in.]
Rack "0": 67.5 mm [2.60 in.]
Play: approx. 2 mm [0.12 in.]
Play: approx. 2 mm [0.12 in.]
Control rack
Fuel
injection pump
Fixed length
(208.5 ± 1.0 mm [11.97 ± 0.0394 in.])
control rink A-2
Adjustable length
control link B-2
Adjustable length control link B-2
Adjustable length control link B-2
Adjustable length control link B-1
Adjustable length control link B-3
Stop lever
95.5 mm
[3.760 in.]
Governor lever
Control lever
158 ± 1.5 mm
[6.221 ± 0.59 in.]
Fixed length
(208.5 ± 1.0 mm
[11.97 ± 0.0394 in.])
control rink A-3
Distance between the end face of fuel injection pump
Distance between the end face of fuel injection pump
and the center of hole at control rack end: 78 mm [3.07 in.]
and the center of hole at control rack end: 78 mm [3.07 in.]
Control rack position
Control rack position ÞŸ0Þ
: 67.5mm [2.99 in.]
Play: approx. 2 mm [0.08 in.]
Play: approx. 2 mm [0.08 in.]
158 ± 1.5 mm
[6.221 ± 0.59 in.]
95.5 mm
[3.760 in.]
Distance between the end face of fuel injection pump
and the center of hole at control rack end: 78 mm [3.07 in.]
Control rack position ÞŸ0Þ : 67.5mm [2.99 in.]
Play: approx. 2 mm [0.08 in.]
Control lever
Adjustable length control link B-4
Distance from the end of
fuel injection pump to the
hole center of rack end
Rack "0": 67.5 mm [2.60 in.]
Play: approx. 2 mm [0.12 in.]
Approx.
25q
To Next Page
Loading...
Need help?
General
