For your safety
Layout and meaning of alert messages
This signal word identifies hazards that could potentially cause minor or moderate physical injury or
damage to property, if not avoided.
This signal word identifies hazards that could potentially cause damage to property, if not avoided.
There are some actions that need to be performed in several steps. If there is a risk involved in
carrying out any of these steps, a safety warning will appear in the instructions themselves.
Safety instructions always directly precede the step involving risk and can be identified by their bold
font type and a signal word.
1. NOTICE! This is a notice.It warns that there is a risk involved in the next step.
2. Step involving risk.
Layout and meaning of alert messages
An alarm message may appear during operation.
The alarm messages have the following purpose:
▪ Warning - These messages warn the operator if the current status of the field sprayer could lead
to a dangerous situation.
▪ Information - These messages inform the operator that the current status of the field sprayer or
configuration is not correct and could lead to faults in operation.
On the following diagram, you can see how the alarm messages are structured:
Alarm message structure
Name of the component that caused the alarm.
Problem description and solution
Information on the exact cause of an alarm message or how to rectify a fault can be found in the
section "Alarm messages"
To Next Page
Loading...
Need help?
General
