SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--72
GROUND SPEEDS in Km/h and (MPH) at Rated Engine Speed (2200 rev/min)
with 40 Km/h 12 x 12 Transmission and Creeper Speeds -- Models with Heavy Duty Rear Axle*
Shift Lever Positions Rear Tyre Size
Gear Ratio
Range lever Main lever
18.4R--38, 520/70R--38
600/65R--38
FORWARD RATIOS Standard Speeds Creeper Speeds
F1
L 1 2.01 (1.25) 0.20 (0.12)
F2 L 2 2.94 (1.83) 0.29 (0.18)
F3 L 3 4.20 (2.62) 0.42 (0.26)
F4 L 4 6.11 (3.81) 0.61 (0.38)
F5 M 1 5.04 (3.14) 0.50 (0.31)
F6 M 2 7.39 (4.61) 0.73 (0.46)
F7 M 3 10.55 (6.58) 1.05 (0.65)
F8 M 4 15.35 (9.57) 1.53 (0.95)
F9 H 1 12.21 (7.61) 1.21 (0.76)
F10 H 2 17.88 (11.15) 1.78 (1.11)
F11 H 3 25.53 (15.93) 1.97 (1.23)
F12 H 4 37.16 (23.17) 3.69 (2.30)
REVERSE RATIOS Standard Speeds Creeper Speeds
R1 L 1 2.06 (1.28) 0.21 (0.13)
R2 L 2 3.02 (1.88) 0.30 (0.19)
R3 L 3 4.31 (2.69) 0.43 (0.27)
R4 L 4 6.27 (3.91) 0.62 (0.39)
R5 M 1 5.21 (3.25) 0.51 (0.32)
R6 M 2 7.57 (4.72) 0.75 (0.47)
R7 M 3 10.82 (6.75) 1.08 (0.67)
R8 M 4 15.74 (9.82) 1.57 (0.98)
R9 H 1 12.52 (7.81) 1.25 (0.78)
R10 H 2 18.34 (11.44) 1.82 (1.14)
R11 H 3 26.19 (16.33) 2.03 (1.26)
R12 H 4 38.11 (23.77) 3.79 (2.36)
*See page 3--138
To Next Page
Loading...
Need help?
General
