SECTION 4 -- LUBRICATION AND MAINTENANCE
4--24
Streering Cylinders and Track Rods (Supersteer
4WD axle)
Apply a grease gun to the lubrication fittings as
shown.
43
Upper Swivel Bearings, Axle Housing and
Steering Cylinder end (all 4WD axles)
Apply a grease gun to the lubrication fitting as shown.
NOTE: The left hand swivel bearing is shown. There
is a similar grease fitting on the right--hand swivel
bearing.
44
Lower Swivel Bearings (all 4WD axles)
Apply a grease gun to the lubrication fitting as shown.
NOTE: The left hand swivel bearing is shown. There
is a similar grease fitting on the right--hand swivel
bearing.
TA57
45
Rear Tow Hitch (with slider frame)
Apply a grease gun to the lubrication fitting as shown.
46