SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--37
ANALOGUE/DIGITAL INSTRUMENTATION
The instrument panel consists of three analogue
gauges , three liquid crystal displays (LCD’s) and a
dot matrix display (DMD).
In addition to the gauges and LCD displays there are
25 coloured lights providing other operating
information or warning of system malfunction.
The lower left button on the instrument panel controls
the intensity of back lighting for the LCD’s and dot
matrix displays, the two right--hand buttons adjust
the digital clock.
69
GAUGES
Engine Tachometer
The tachometer (1) indicates engine revolutions per
minute. Each division on the scale represents 100
rev/min., therefore with the needle indicating ‘20’ the
engine is running at 2000 rev/min.
70
Engine Coolant Temperature Gauge
The temperature gauge (2) indicates the
temperature of the engine coolant. If the needle
enters the upper (red) section of the gauge while the
engine is running, stop the engine and investigate
the cause.
Fuel Level Gauge
The gauge (3) indicates the level of fuel in the tank
and is only operative with the key-start switch turned
on. See Section 8 for fuel capacities.
71
To Next Page
Loading...
Need help?
General
